If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
If you have (or have neighbors with...) little kids or grandkids, carefully screw a 1" or longer piece of a broken crayon in, and then carefully remove it and measure. The wax is soft enough to engage with and be cut by the real threads, and if any remains in afterwards -- a blowdryer, a dental pick and Q-tips gets it all out. One time, I had to reduce the diameter of the crayon slightly first -- you can taper it so it enters more easily. You can get the pitch (threads per inch) off partially formed threads, but you'll want at least one or two full threads to get the true diameter; and that's where tapering the crayon helps out.
Yawohl, it's a hokey home gunsmithing trick -- but it's worked for me.
Comment