Announcement

Collapse
No announcement yet.

Krieghoff scope bases

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Krieghoff scope bases

    I've been told that this subject has been previously discussed but cannot find the discussion.
    I've never seen the scope bases on a recently acquired Waldschuetz Krieghoff drilling and am looking for any information on their history and possible adaption to use currently available scope mounts. I'll try to attach photos of the bases.
    Thanks,
    Otto 3.jpg 4.jpg otn1.jpg

  • #2
    Hello

    Maybe this is the thread/discussion you have been looking for?

    https://www.germanguns.com/vb5/forum...se-information

    Peter

    Comment


    • #3
      Thanks Peter.
      That's exactly what I was looking for.
      Otto

      Comment


      • #4
        Otto, you got a PM
        Axel

        Comment


        • #5
          I used a set of Warne QD mounts to attach a scope to my drilling. The Krieghoff dovetail mounts have slightly different widths, so after they are machined to firmly clamp to the bases, there is a offset of the rear mount that must be corrected. The rear dovetail was welded up and extended about .050". Then a new dovetail was cut slightly undersize to correct the .023" offset. The new dovetail was filed until the scope could be attached without binding.
          Attached is a photo of the scope in place.
          Otto scope base -L.jpg

          Comment

          Working...
          X